No products in the cart.
The ADECO ADEGRIP PVC adhesive is a high-quality 2-component adhesive especially for inflatable boats made of PVC or vinyl. The marine adhesive is ideal for attaching pads or handles of snap davits for inflatable boats, for D-ring pads, for spacer pads or other pads on PVC inflatable dinghies.
Before gluing the pads to the inflatable boat skin, they should be cleaned with a special PVC cleaner (e.g. ADECO CLEANER 264). The surface on the inflatable boat should also be cleaned with the cleaner. Then add about 6 – 8% activator to the adhesive and mix it evenly. The mixture has a shelf life of up to 3 hours and must be processed within this time. The adhesive mixture is spread on both surfaces. Apply again after 20 minutes. 15 minutes, reactivate the adhesive with hot air, e.g. with a hair dryer or infrared lamp. The final shelf life is reached after about 72 hours.
Scope of delivery:
- 1x can of glue 125g
- 1x bottle of activator/hardener 10ml
Hazard warnings:
- H225 Highly flammable liquid and vapour.
- H319 Causes serious eye irritation.
- H336 May cause drowsiness and dizziness.
- EUH066 Repeated exposure may cause skin dryness or cracking.
- EUH208 Contains KOLOPHONIUM. Can cause allergic reactions.
Safety instructions:
- P101 needs medical advice, have product container or label at hand.
- P102 Keep out of the reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
- P233 Keep container tightly closed. P280 Wear protective gloves and eye/face protection.
- P312 Call a POISON CENTER/doctor/…if you feel unwell.
- P501 Dispose of contents / container / in accordance with local regulations / national / international.
