Pontoon LINK makes a dinghy with flat or domed pontoon endings compatible with Dinghy Rings FLEX, SLIM or BOLD. It’s made from PVC for easy and safe mounting on a PVC or Hypalon dinghy.
Materials and tools needed:
- Acetone or PVC Primer
- PVC 2-component adhesive (e.g. Adeco Adegrip, only if the boat is made of PVC)
- Hypalon 2-component adhesive (e.g. Adeco Adeprene, only if the boat is made of Hypalon)
- Brush, Pen, Cloth, Soft edge scraper
Important:
Find out if your dinghie is made of PVC or Hypalon. Before starting to glue, note that your workplace must be well ventilated, hot and dry, 18-25 degrees C. If the air is damp, the glue can not be used. Do not use any open flame, as solvents are highly flammable. Do not use any adhesive that has been mixed for more than 4 hours. Do not use sandpaper on PVC fabrics. If you have a Hypalon boat, the contact surfaces of the pontons shall be easily sanded with sandpaperand primed with 2-component Hypalon adhesive. You will then apply a thinlayer of Hypalon adhesive as a primer and allow it to dry. Then you apply PVC glue on top of that.
Features:
- Maximum load (incl. outboard motor): 50 kg
- Material: PVC
- Application: LINK is glued to the dinghy pontoon end with 2-component PVC adhesive.
Scope of delivery:
2x Dinghy Rings Pontoon Link
Mounting instructions
Instructions:
Instructions (PDF)
Shipping:
Normally ready for dispatch in 7 days.